|
-
Senior Member
A very nice set of wheels, my only concern is that they are 1" smaller. I want to use these as spare tires just in case I loose a tire while riding. Do you know if I can mount tires that are the same height? I would not want to run a different size wheel or tire as I believe it would cause damage to the drive line. Could other members chime in and give me your two cents?
Larry
-
-
Senior Member
Hey Larry just thought I would bring to attention that your aluminum rims are size 14". All steel wheels (old and new style) are 12". You can put the Terra Hawk AT (All Terrain) tires on the steel rims, or the Ancla M-T (Extreme Terrain) but not the Maxxis BigHorn 2.0 Radials because those are for the 14" rims.
Also that the steel rims (old and new) are the same size in height and width. Its just that one is closer to the suspension than the other. In this case my rim would give your suspension an extra inch of room. I don't know why JD did that, even my friend that owns the JD dealer here wandered why they did that. Anyway thought this might help ya out.
-
-
Senior Member
Thank you for bringing that to my attention, must have my head up the tail! Going to send you a PM.
Larry
-
-
Member
I would like to trade for a set of aluminum rims and tires.
I have a 27" set of rubber on steel wheels.
Have you made a deal?
I am pretty sure you also have 27" rubber so these would be ideal spares even though your rims are 14" and mine are 12". I put oversize tires on to get more clearance and speed.
Last edited by kinzepower; 05-12-2011 at 11:53 PM.
-
-
Senior Member
-
-
Junior Member
I need one steel wheel for a 620I
-
-
Senior Member
Steel Wheels/Tires Wanted
Originally Posted by RickHawrylak
I need one steel wheel for a 620I
You might want to start a new thread, this thread is rather dated.
Also check with Power Sports Nation in Norfolk Nebraska they are a large used part warehouse for UTV’s.
I believe they have numerous parts for a 620i listed on their website.
-
|