My experience with this noise is the starter bendix hanging up. I have been able to clean the bendix and spray a little spray lube on it. It should help.
Type: Posts; User: trphyhunt
My experience with this noise is the starter bendix hanging up. I have been able to clean the bendix and spray a little spray lube on it. It should help.
Just a question. Are the springs adjusted all the way up to take some of the pressure off the shocks? The 825i and 855d have adjustable springs. You should have got the tool with the owners manual.
Before I took it to the shop I would do a little more to find out what is making the noise. I have seen the differentials fail, but most of the time it is the driveline to the differential. There is...
I look at it a different way. The axles are designed to be the weaker link between the wheel and the front differential. Yes, I have replaced a few axles. I know one of them was because of abuse. I...
Try cycling the glow plugs a couple of times. You may want to check and make sure all the glow plugs are working. It should start at low temperatures as long as the glow plugs are working.
Here are two pictures from a diferent angle. Hope this helps. 28892890
The coolant temperature switch does not close until the coolant reaches 230f. It will take awhile to reach this temperature due to the large cooling capacity of these units. I always recommend using...
If you already have the heavy duty brush gaurd installed this will bolt right on. The heavy duty brush gaurd kit is the same for all the 2011 and up XUV's.
286328642865I built a bolt on brush gaurd that protects the entire radiator. If you don't cover the entire radiator sticks and debris can still come through the grill. I would like to sell this one...
I worked with some duck hunters that tried to go through deep water with their gator. The problem wasn't that there was water in the intake but the belt would get wet and would not grip the clutches....
The grill on your gator may allow sticks and debris to damage your radiator. I have a bolt on brush gaurd available to keep this from happening. The radiator costs over $350 plus the shop labor to...