|
-
Senior Member
Steel Wheels/Tires Wanted
In the future if any of you 825I owner's decide to upgrade to alloy wheels you may decide to sell you steel wheels and tires, I would be very much interested in a spare set of tires/wheels.
Larry
-
-
Senior Member
Hey Larry, Ive got a complete set of steel rims off of out 620i with center caps, nuts and all. They are a tad bit different looking than the new steel rims but I upgraded to a set of aluminum rims and don't need these anymore. Let me know if this sounds interesting.
-
-
Senior Member
I am unfamiliar with the size, wheels and lug pattern between the 620i and the 825i. Quesitons; What is the size difference between the two machines? Is the lug pattern the same? My many thanks.
Larry
-
-
Senior Member
Hi Larry, The actual rims are the same size as what yours are. The bolt pattern appears to be the same as well but please check one thing for me on yours. Measure the distance from one lug nut to the furthest lug nut away from the other (center to center of the lugs). Myne is 4&3/4" between from center to center. That will tell us if the bolt pattern is truly the same. Thanks
Last edited by gatorxuv620i; 04-09-2011 at 12:28 PM.
-
-
Senior Member
The bolt pattern is the same but the offset is different, You have to see if the rim will clear the brake caliper.
-
-
Senior Member
Thank you GATORDONE: Larry I'm going to the JD dealer Tuesday a bout's and ill take my steel rim up there and since my friend owns the dealer he should let me see if it'll all work out.
-
-
Senior Member
In a earlier post by Steve_in_semich where he states the lug pattern for the 825I is 5X4.5? I can see where the back space would be of major consideration. I anxiously awiat you answer. If they fit could you please email me some pictures of them at lfcote@roadrunner.com
Very respectfully,
Larry
Deputy347k9
-
-
Senior Member
Sure thing, ill get some pics sent to you and I'm curious myself to see if they will work.
-
-
Senior Member
Hey, I went to the JD dealer today and measured the offset, bolt pattern, hub size and all. By putting the older (620i) steel rims on your gator they will give your suspension both front and back an extra 1" of room!!!! IDK why JD made the newer ones bigger but they did for some reason. Anyway long story short they will fit your gator perfectly!!! Ill get some pics of them tomorrow. They have no scratches on them and come complete with hub caps, lug nuts, and the wheels.
-
-
-
|