Results 1 to 6 of 6

Thread: modified amt 600 (not sure what year yet)

  1. #1
    Junior Member gatorsalad's Avatar
    Join Date
    Oct 2012
    Location
    southern wisconsin
    Posts
    25
    Thanks
    0
    Thanked 0 Times in 0 Posts

    modified amt 600 (not sure what year yet)

    I have acquired 2 amt 600's in the past few months, I have made some simple but "necessary"( ha ha) mods to it. First of the mods is a light bar with Harley turn signals, the next thing i did was make new front wheel skirts.(from scrap metal) then i made my own trailer hitch bar. I also added some angle iron to the top of the removable gate on the box so i can back up to my trash receptacles and pic them up to haul to the end of the driveway and back. I also extended a rod for gear shifting up to the front of the vehicle and moved all the switches to the top of the console for easier reach. my other gator is pretty much complete (minus rear box) but it has no spark. they both have the hydraulic lift. I am going to be making a "ladder rack that extends over the driver and cover it with a tarp . I have also thought about using an old JEEP rag top to cover it. hope you enjoy the photos. I will post more as i do more.

  2. #2
    Junior Member gatorsalad's Avatar
    Join Date
    Oct 2012
    Location
    southern wisconsin
    Posts
    25
    Thanks
    0
    Thanked 0 Times in 0 Posts

  3. #3
    Junior Member
    Join Date
    Sep 2012
    Location
    Finland
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts

    AMT 600 year model table link

    You can match the year with this table:

    https://groundscare.custhelp.com/ci/...odels+-+UV.pdf

    AMT 600
    1987
    W00600X001101 - 15403
    AMT 600
    1988
    W00600xX015404 - 18720
    AMT 600
    1989
    W00600X018721 - 20879
    AMT 600
    1990
    W00600X020880 - 217863

    Yes I think so too..there is a misprint in the file 1990
    must be!?
    AMT 600 -89 w. GX390 13hp (copy)motor

  4. #4
    Junior Member gatorsalad's Avatar
    Join Date
    Oct 2012
    Location
    southern wisconsin
    Posts
    25
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thanks !

  5. #5
    Junior Member
    Join Date
    Jun 2013
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Can anyone advise me how to remove a steering wheel off a gator amt 626. There is a Phillips head screw going thru the shaft with a nut on the opposite side. I removed the nut. The Phillips head screw will not move. I've soaked it in penetrating oil and nothing.
    Last edited by Rod7290; 06-23-2013 at 03:45 PM.

  6. #6
    Member Mr. Moose's Avatar
    Join Date
    Mar 2014
    Location
    Ontario Canada
    Posts
    33
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Under the Deere symbol is a nut I'm pretty sure and it comes out and then the wheel itself comes off. I've had the whole front end apart a year ago but don't quite remember how it's held together down in the bottom.
    -JD AMT 626
    -JD 855
    -JD 322
    -Quadrunner 250
    -Quadrunner 280 (Project)
    -Big Red 200es
    -Skidoo Mach 1
    -Yamaha DT 175

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •