|
-
Junior Member
Parking lights
Just finished installing wires for parking lights on 825i. This is not as hard you think,I went to NAPA Store and got a GM Terminal part number 725187. To begin with remove the light socket from the light. In the socket remove the white plastic cover now you can put the terminal in with the wire attached. The wire should go in the bottom and out the top making sure to align the terminal like the other two, reinstall the white cover and hook the two new wires to the single pink wire on switch, or you can use a tester to check first.
-
-
Senior Member
Thanks dar4300, I installed the signal light kit in October and was going to do like you but I could not find the correct terminal. The pink wire is the one on the main headlight switch?
Jake
-
-
Junior Member
Yes Jake that is the main switch.It has single pink to taillights only. Then a double pink to the headlights and taillights.
-
-
Senior Member
-
|