Set Clock

[purplewg]

Well, my clock was wrong on the instrument panel so I dug out the manual to see how to set it. Guess what? It doesn't tell you how to do that. After some time I finally figured out you need to press and hold both the up arrow and down arrow buttons on the right side of the display till the 12/24 selection comes up. From there you can sort of figure it out.

[Deputy347k9]

Page 18, upper left side #3 is where the clock directions start! I am glad you mentioned it as I would not have known either. Thanks you.

Larry

[number3shot]

I saw the instuctions, but found it easier to play around with the settings than following the steps in the manual.

[dloftis]

My clock in my 2014 825iS4 does not keep the correct time. It might be off a few minutes in two weeks and an hour after another few weeks. Battery is o.k. and cranks right up after sitting for two weeks. Anybody else had / has this issue? I'm trying to decide whether to get a warranty issue started before my year is up in July 2015.

[den1845]

dloftis...I have the same problem. It loses time over a few weeks. I didn't bother with a taking it in for service. I find myself not using it much at all.

[roboman]

I work for a business that bought 5 brand new 2014 625is last summer and we are having the exact same issue with the clocks...