PDA

View Full Version : rear back up light questions



hornadylnl
08-25-2011, 07:57 PM
So, I just got the 855 and haven't had a chance to take it out after dark yet. I turned the headlights on in my barn and they lit up the whole barn where I could comfortably walk around the entire thing. Granted, the whole interior is white but I think the headlights will be ample for my needs. If I end up putting on a plow, I'll likely put some lights up on the OPS to cover what the plow blocks out.

Now here's my question. It looks like the factory tail lights have white back up lights in them. Are they turned on when the tranny is in reverse? Is there a switch somewhere on the shifter linkage for reverse? If so, I may add my own lights or eventually put on the factory tail lights. I can tell that reversing in darkness is going to be a problem with no rear lights. I'm also guessing that if I want some serious lighting for reverse, I'm probably going to want to run a relay off of the reverse switch instead of trying to power the lights off of the switch alone.

john
08-25-2011, 10:19 PM
before i got my 855d my dealer let me use a 825i which had back up lights. when my 855 was delerved it did not have backup lights.the next time i saw my dealer i asked him about it he said he would come out and put them in at no cost. it was very easy,took about 2min. john

hornadylnl
08-25-2011, 10:37 PM
Would you happen to have a part number for them? I just took the gator out for a quick spin to see how the lights worked. They were great although I may add some cheap fog lights to light up right in front a little better.

GatorMover
08-30-2011, 09:19 AM
Crazy how these things come up. I have a customer with a new 855. Said his backup lights don't work. Checked 825 and sure enough, backup lights. So, looked at his tranny and where switch should be is just a plug. So, I assume we can pop a switch in. Came up just yesterday....oh the timing.

Should be part#MIA881603-this is the part in an 825

hornadylnl
08-30-2011, 09:26 AM
I looked and didn't see a switch anywhere. Would you happen to have an assembly number for the switch and any brackets for it?

GatorMover
08-30-2011, 09:40 AM
edited above