View Full Version : Dash Question
wkdani
09-17-2011, 12:43 AM
I own a 825i and just to the left of the steering wheel post is a small round plug. Can anyone tell me what the opeing is used for?
pugwash4
09-17-2011, 07:52 AM
i think like a light or horn
J Grace
09-17-2011, 09:16 AM
I took it out and used it for my rear cab camera - on/off switch.
825joe
09-17-2011, 09:26 AM
Used for the JD horn kit.
wkdani
09-17-2011, 09:27 AM
Thanks
WOEII
09-17-2011, 11:14 AM
I took it out and used it for my rear cab camera - on/off switch.
:lurk:
wkdani
09-17-2011, 11:53 AM
The Deere horn kit I bought has a rocker switch not a button.
GATORDONE
09-17-2011, 01:52 PM
:lol:Could be for the nitrous oxide system. LoL
825joe
09-17-2011, 02:22 PM
I have seen the round button ones not the switch one. Could be two different ones who knows. I know the rectangular spot on the left is for the directionals and the upper one on the left is the dump switch.
wkdani
09-17-2011, 06:11 PM
Hey 825joe
Do you have a Superwinch Terra series on your 825i?
If so how did you install it on your Gator?
825joe
09-21-2011, 09:21 AM
check out the tread on the winches bud.. http://johndeeregatorforum.com/forum/showthread.php?10395-2011-825i-Winch-install/page4&highlight=winch I will post up some pics soon! I used the bracket that came with the winch and drilled my own holes for the mount. Trimmed the plastic a bit in front and it looks factory! Perfect. Ran the wires through the center console and mounted the contactor next to the battery. I like that the bumper is nice and strong to mount a winch on. To get the bolts from underneath was a challenge but got them with a wobbler extention. You drill a larger hole to fit a socket under neath where the bolts go up top. Fits in there perfectly.
wkdani
09-21-2011, 09:38 AM
Nice fit.
Thanks for all the info.
825joe
09-21-2011, 12:40 PM
No problem.
Powered by vBulletin® Version 4.2.2 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.