View Full Version : Clutching on 825i
08roady
09-30-2011, 01:28 PM
Has anybody did any mods to there clutching on an 825i yet? It seems too me that there is alot of horsepower not being used that maybe taken up by doing some clutching changes! Let me know if anybody has messed with this!
825joe
09-30-2011, 01:45 PM
I agree. I am curious as well. I think some clutch adjustments would do wonders for all that power.
osiris
02-06-2012, 08:57 PM
So i got a positive e-mail today reguarding clutching options for anyone intrested
We have several springs and an adjustable weight set for the 825i. The weight set is PN 930950 and retail price is $199. Any Polaris weight will work in the TEAM drive with a spacer kit.
Mark Schiffner
Aftermarket & Retail Products
TEAMMotorsports@TEAM-ind.com
Phone: 218-844-3283
TEAMaftermarket.com
purplewg
02-07-2012, 08:14 AM
What I seem to notice is that there is a huge increase in RPM's before I really start to see any speed. I am turning almost 3500 RPM and going maybe 15 MPH. I would think a decrease in spring tension would allow the clutch to "lock up" sooner, meaning at a lower RPM. Not sure if this would increase top speed or not but at least my RPM's would be down considerably when I am just poking long at 15-20 MPH. I'm thinking this would also help fuel consumption.
Regulator
02-07-2012, 08:30 AM
What I seem to notice is that there is a huge increase in RPM's before I really start to see any speed. I am turning almost 3500 RPM and going maybe 15 MPH. I would think a decrease in spring tension would allow the clutch to "lock up" sooner, meaning at a lower RPM. Not sure if this would increase top speed or not but at least my RPM's would be down considerably when I am just poking long at 15-20 MPH. I'm thinking this would also help fuel consumption.
That is exactly right Purple...less spring tension or even heavier clutch weights would have the effect of more speed at less RPM, without losing HP or Torque...a guy on the other Forum told me about grinding down his clutch springs to 2/3rds of their normal thickness and he said it made his 825i a whole lot nicer to drive...less noise, rpm's, and fuel consumption...
I really wanna try an aftermarket set of thinner springs to see what happens...adjustable clutch weights would be good too...
Larry in MD :Jestr:
ratrod
02-07-2012, 08:55 AM
does anyone know the different spring ratings for the different springs available?
osiris
02-07-2012, 09:11 PM
talked to them today and they said their releasing a complete clutch package at the end of the month for better towing, and top end so im waiting for that
Funkster
02-07-2012, 11:06 PM
Would this new clutch package work on a 855D?
Regulator
02-08-2012, 09:31 AM
talked to them today and they said their releasing a complete clutch package at the end of the month for better towing, and top end so im waiting for that
I have a feeling that they will sell like hotcakes when they become available...I know I will be on the list to get one for sure...that is the one thing that bothers me with my Gator...too many rpm's for the speed you get from it...a clutch that engages faster to make it get up and go quicker will be a vast improvement...
Larry in MD :Jestr:
purplewg
02-08-2012, 09:49 AM
talked to them today and they said their releasing a complete clutch package at the end of the month for better towing, and top end so im waiting for that
Talked to who? JD or some aftermarket supplier?
pcbunn
02-08-2012, 12:21 PM
Just want to stay informed on this issue as I've also wondered why the thing revs so much at slow speeds? If anybody changes the springs please take pictures of the proceedure.
825joe
02-08-2012, 12:54 PM
Keep us posted!
osiris
02-08-2012, 09:53 PM
purplewg -talked to Team Clutch, aftermarket company
Funkster - Honestly i didnt ask what models it would fit but arent the clutchs the same on the 855d and 825i just diffrent springs??
ill keep you guys posted but its going to be like my heater sitting at home the last 2 weeks while im sitting at work.....
Regulator
02-08-2012, 10:30 PM
talked to them today and they said their releasing a complete clutch package at the end of the month for better towing, and top end so im waiting for that
Osiris...I'm curious (I guess a bit nosey???)....where is your work???...evidentally it's away from your home...I saw you post a few times that you'll have to wait before you can do something, so I was just wondering what you do...sounds kinda like the oil fields or gas production...if I am being too nosey, just tell me to mind my own business, and I'll understand completely...
I think I'd like to check out Team's clutch products for my 825i real soon...thanx for doing the initial research...
Larry in MD :Jestr:
purplewg
02-09-2012, 08:12 AM
purplewg -talked to Team Clutch, aftermarket company
Funkster - Honestly i didnt ask what models it would fit but arent the clutchs the same on the 855d and 825i just diffrent springs??
ill keep you guys posted but its going to be like my heater sitting at home the last 2 weeks while im sitting at work.....
Good, I look forward to hearing some feedback from folks who try it. Don't wanna be the first guinea pig. My concern is that the kit may be more for racing than actual everyday use. Maybe they should let me evaluate them and report back. :BG:
osiris
02-09-2012, 11:56 PM
Regulator -your right Oil and gas industry -Out in eastern Montana right now
purplewg - Ill give Team Clutch a shot they had a answer for me right away like he knew all the info off the top of his head i was impressed
Regulator
02-10-2012, 12:46 AM
Regulator -your right Oil and gas industry -Out in eastern Montana right now
purplewg - Ill give Team Clutch a shot they had a answer for me right away like he knew all the info off the top of his head i was impressed
Thanx man...I was hoping I wasn't being too forward and overstepping my bounds by asking...it just kinda feels like a bunch of buds hanging out here, so it's nice to know a little about whom you are talking to electronically...
I hear the gas and oil industry is the hot ticket right now out that way...they say if you don't mind the weather, there are plenty of jobs, and the cost of living isn't too high...After living in Maryland most of my life, I don't know if I could deal with those winters up there...I have a friend in Boseman MT, and a couple motorcycle buds who live in Wisconsin...I kid them about their "one month" of decent riding weather!!!...hahaha!!!...I have one friend who is a machinist for a company in South Dakota, and his work is looking for someone to be a machine operator...they haven't been able to find anyone in almost a year now...the pay is good, and they have benefits, AND they'll even train the right candidate...people not wanting to move there seems to be the problem, along with the fact that some people just can't afford to pick up and move to another State...
Thanx again for the info on the Team Clutch deal...I am going to pursue this a bit further...I appreciate you doing the initial legwork in finding out who and what...
Larry in MD :Jestr:
ratrod
02-10-2012, 09:04 AM
Hey Larry if you dont mind me asking what company does your friend work for in SD?
Regulator
02-10-2012, 10:33 AM
Hey Larry if you dont mind me asking what company does your friend work for in SD?
I don't know the company name off hand, but I will find out for you...give me a few days and I should be able to let you know...he also has a small home based company that he started that makes coats and vests...he makes them per order, and are all hand-made, custom coats, with all the materials coming from the good ole USA...it's called "Bruns Clothing", and the guy's name is Lee Bruns...he has a website if you want to check him out...he's on a garage build motorcycle forum I have been a memeber of for the past 9 or 10 years...he was there when I joined up and is a really cool guy...he also does custom machining himself, and teaches those who want to learn the trade in his garage...
Larry in MD :Jestr:
jonny2guns4u
02-11-2012, 09:49 AM
This Thread really caught my eye. I would love for the Clutch to lock up earlier. I just don't know much about CVT Transmissions. How hard do you guys think thesee Springs and Weights be to install? I'm pretty Mechanically Inclined just would be very nervous about tearing into a CVT.
luc2121
02-11-2012, 10:42 AM
There not that complicated, watch some youtube videos. There all basically made the same
natsuto
02-20-2012, 10:20 PM
Sounds a little hope that an oil or gas production. If I was too nosy, just tell me to think of their own business, I fully understand.
osiris
02-20-2012, 11:07 PM
natsuto- Its oil in ND and E MT, but ill be calling in the am and see if I can place an order yet for the clutch
Regulator
02-21-2012, 09:33 AM
Osiris...the Natsuto dude is a spammer...I looked at all three of his posts and he copies and pastes parts of others posts and puts them in his post just so he can post a message hawking his printer cartridges that are shown in his signature line...
I know a piece of shit spammer when I see one...I reported him to the Forum Owner already....these guys join every Forum they can just to spam their shit products...I think they ALL should be castrated with a golf club....
Larry in MD :Jestr:
osiris
02-21-2012, 09:42 AM
sad part is i looked at his 3 posts trying to figure if he didnt know how to spell or if he was using one of the translator programs that gives u horrible english.. casterated with a golf club huh thats a new one for me.
purplewg
02-21-2012, 10:53 AM
Osiris...the Natsuto dude is a spammer...I looked at all three of his posts and he copies and pastes parts of others posts and puts them in his post just so he can post a message hawking his printer cartridges that are shown in his signature line...
I know a piece of shit spammer when I see one...I reported him to the Forum Owner already....these guys join every Forum they can just to spam their shit products...I think they ALL should be castrated with a golf club....
Larry in MD :Jestr:
Larry, why don't you tell us how you really feel? :BG::BG::BG:
I agree totally with you BTW!
osiris
02-22-2012, 01:22 AM
I called about the clutch today they said call back in 2 weeks, but they said the complete assembley will be replaced so it engages smoother and helps with engine braking still didnt have a price for me yet.. that sucks i wanted to order it i hate waiting to order stuff :TT:
osiris
03-07-2012, 09:59 PM
got a email today from team and it said....:BS:
thank you for contacting TEAM Industries about an overdrive clutch for your 825i Gator! I have been informed by the general manager of our Aftermarket division that we expect to have one available by late March to mid-April. Please watch our website (http://TEAMaftermarket.com) and our Facebook page (http://www.facebook.com/teamaftermarket) for further updates.
Regulator
03-07-2012, 10:23 PM
Osiris...thanx for the update...but, jeez...how long does it take to get one of these clutches up and running???...I guarantee you that they have one out already for the new Wildcat!!!...hahaha...I'm just sooo anxious to get something that I am getting frustrated...l know that once they get it right, that it will really wake up these Gator engine's to their full potential...I know that there is a quieter Chery engine that doesn't have to rev up so much to get some speed out of it, with better gas mileage in our future with a new and improved clutch unit installed...
Again, thanx for the update...I appreciate you staying on this....I have searched the internet for other clutching companies that might have something, and I have seen absolutely nothing...so, we wait...
Larry in MD :Jestr:
osiris
03-07-2012, 10:48 PM
yeah no kidding they must be running into some kind of issues, but im sure ill hardly use the gator in the summer so its not a huge deal but i want to get it on and see the before and after, after this wait it better be a huge diffrence but it is what it is, ill call and harass them again in 2 weeks:BG:
825joe
03-08-2012, 09:10 AM
I tried to got to teamaftermarket.com and there was no listing for john deere...hmmm :Cnfsd:
Txcoastjason
03-12-2012, 10:19 PM
I sent an email to express my interest in the product and asked about the benefits. The reply was as follows.... "We are not making the kit just yet It will be here in April. You will gain 4-5 mph, better acceleration, better draw bar pull, and a type of engine braking". Sounds pretty exciting. I wonder about the cost.
2255puller
03-12-2012, 11:05 PM
I used to deal with Team when drag racing snowmobiles. Top notch company, my first stop when re-clutching. Deal with confidence!!!
pcbunn
03-13-2012, 11:32 AM
I wonder what they mean by a "type of engine braking"?
825joe
03-14-2012, 09:35 AM
I am very interested!
dakotakid97
04-22-2012, 09:25 AM
its april 22. did anyone here about the clutch kit yet. i am very interested also. have done clutch tuning on older polaris snowmobile clutches. does any one know the weights that are in the 825? there is alot of companys that make adjustable weights that would work.
osiris
04-22-2012, 11:05 AM
I emailed them yesterday im sure ill hear back on monday
gatorman30
04-22-2012, 01:43 PM
From Team Industries.
"The clutches will be here on April 19th. We do have springs for them. There will be two different options to buy. There will be a new primary clutch set up ready to go, and there will be adjustable weights that can be bought extra. We did see an improvement in each area. "
gatorman30
04-22-2012, 01:45 PM
$349.00 For the primary clutch with weights and spring.
$200.00 For adjustable weights if you want them
morrisok
04-24-2012, 09:52 AM
I am guessing this will just help the Gator from screaming so bad but not change top end at all??
osiris
04-24-2012, 07:09 PM
i got this over the weekend and by the time i rembered to call them today they were closed try again tomorrow then ill post a $tag on it and whatever info they have for me on it...waited long enough it better be sweet:FX: We are waiting on receipt of the final components of the kit, but expect to have it available to ship by the end of this week. The kit, part # 901004, comes with an idler primary, primary spring, and new weights.
If you would like to place an order now to be shipped as soon as the final kit components come in, please call Dean at 218-846-6302 for assistance.
If I may answer any additional questions for you, please reply to this email.
Thank you kindly!
osiris
04-28-2012, 01:39 PM
talked to them yesterday got told itll be another 2 weeks, :Wlys: Thinking ill just wait till fall and call them at this rate guessing there isnt enough of a demand to get the product made in a decent time frame
Regulator
04-29-2012, 11:30 AM
talked to them yesterday got told itll be another 2 weeks, :Wlys: Thinking ill just wait till fall and call them at this rate guessing there isnt enough of a demand to get the product made in a decent time frame
You just might get the same "check back in two weeks" answer this Fall too, at the rate they are going on these damn clutch kits....I'm gonna keep checking though because I really want something to wake my Gator up...just getting it to get up and go without all the RPM's and noise would be a significant improvement for me!!!
Thanx for keeping up with them anyway...I appreciate the info...:Thmup:
Larry in MD :Jestr:
825joe
04-29-2012, 01:12 PM
here is an update guys.
http://teamaftermarket.com/parts-catalog/product/john-deere-825i-idler-primary-clutch-kit-901004#
Regulator
05-02-2012, 10:26 PM
Well...today I went ahead and pre-ordered the clutch kit from Team Aftermarket for my 825i...they say it will ship AFTER May 14th, and I am hoping it actually will ship closer to that date (:FX:)than a month or two after the middle of May(:mad:)....we'll see I guess....:TT::hsu::hdscrh::Wlys::skep::Bnghd::Nnd:
Oh yeah...Thanx a bunch for the link to the parts, Joe :Thmup:....I kept checking the site every now and then, but I would have never seen them listed as I was always checking under the "New and Hot Products" listing!!!....
I am pretty excited about this....I can't wait to get it installed and see whether I am over-whelmed or under-whelmed at the difference...I will be happy with getting the thing going faster with less RPM's off the start...with the new clutch weights, it should at least accomplish that easily, especially with the lighter primary spring....they say that it should give you an extra 4 or 5 mph on your top-end speed, but I'm not believing that if the top speed is governed by the speed sensor, as I read in a tech post somewhere...maybe if I disconnect the speed sensor, and put my GPS in the Gator, I will be able to tell if I can get up close to that magical 50 mph!!!....
One other thing that I am going to be upgrading at some point....when I get a few bucks saved up, I want to upgrade my tires to some 30" ones...I love my Maxxis Big Horn II's a bunch in 27", but I'd love to get another inch or two in height with the new tires, plus it should actually go faster with the larger diameter tires...the 825i has plenty of power to pull a higher diameter tire easily, I would think...I don't really want a tread that's any more agressive than the Big Horns, so I'll have to see what's available for sale in 30" tires...I might just end up buying another set of custom wheels and have both sets of tires mounted up for whatever situation I decide to get into....it looks like there is plenty of room to fit the extra height tires in the wheel wells, and the only thing I see that I might have to do is to set the shocks on one of the higher settings so that they don't bottom out when hitting the bumps and such....
Anyone have any thoughts on this???....I truely welcome any comments to the good or bad...having a few different opinions is great for me to use to determine just what I can and can't do safely, so that I don't break anything on the Gator or me!!!...I learning this stuff as I go along, as I was never an ATV rider before getting my Gator....I went from mini-bikes and motorcycles right into International Scouts and Jeeps on the Farm...they didn't even have those Honda Big Red 3 Wheelers out yet when I was coming up...hahaha!!!
I plan on doing a Tech picture post when I do the Team Aftermarket Clutch installation...I figure that the least I can do to repay, or "give back" for some of the great tech tips I've learned since being on this Forum...maybe it will help someone else who's not sure whether or not they'd want to tackle the upgreade themselves...
Larry in MD :Jestr:
duling
05-03-2012, 08:08 AM
Larry... a detailed set of install pics would be AWESOME!!! I hold the opinions of this forum in the highest regard so if you guys come to the consensus that this clutch setup is the way to go i will be on it for sure!!! Thanks to all.
825joe
05-03-2012, 09:01 AM
looking forward to the review Larry!!!!
dieselsmith
05-03-2012, 11:10 AM
Me too, i'm sure everybody else will too!:Thmup:
pahawi
05-03-2012, 12:04 PM
looking forward to the review Larry!!!!
+1 :Chers:
Paul
JDMasterTech
05-06-2012, 08:36 PM
To me the clutch looks just like a Polaris primary. When I had my Polaris 600 atv I ran a fully adjustable Heelclicker clutch kit. It has different weights for the flyweights and you can tune it for speed or pulling or a little of both. It has different springs for clutch engagment. Here is a link for them. http://heelclickerclutching.com/atv/polaris/
Cincinati
05-07-2012, 06:59 AM
responses very good! )
purplewg
05-07-2012, 07:59 AM
I too look forward to your test results. I am so tired of doing 3000 RPM and going no where. I suspect this clutch will help with fuel mileage also. Less RPM, less fuel. I don't care if it goes any faster as long as I don't loose speed.
morrisok
05-07-2012, 12:22 PM
Well...today I went ahead and pre-ordered the clutch kit from Team Aftermarket for my 825i...they say it will ship AFTER May 14th, and I am hoping it actually will ship closer to that date (:FX:)than a month or two after the middle of May(:mad:)....we'll see I guess....:TT::hsu::hdscrh::Wlys::skep::Bnghd::Nnd:
Oh yeah...Thanx a bunch for the link to the parts, Joe :Thmup:....I kept checking the site every now and then, but I would have never seen them listed as I was always checking under the "New and Hot Products" listing!!!....
I am pretty excited about this....I can't wait to get it installed and see whether I am over-whelmed or under-whelmed at the difference...I will be happy with getting the thing going faster with less RPM's off the start...with the new clutch weights, it should at least accomplish that easily, especially with the lighter primary spring....they say that it should give you an extra 4 or 5 mph on your top-end speed, but I'm not believing that if the top speed is governed by the speed sensor, as I read in a tech post somewhere...maybe if I disconnect the speed sensor, and put my GPS in the Gator, I will be able to tell if I can get up close to that magical 50 mph!!!....
One other thing that I am going to be upgrading at some point....when I get a few bucks saved up, I want to upgrade my tires to some 30" ones...I love my Maxxis Big Horn II's a bunch in 27", but I'd love to get another inch or two in height with the new tires, plus it should actually go faster with the larger diameter tires...the 825i has plenty of power to pull a higher diameter tire easily, I would think...I don't really want a tread that's any more agressive than the Big Horns, so I'll have to see what's available for sale in 30" tires...I might just end up buying another set of custom wheels and have both sets of tires mounted up for whatever situation I decide to get into....it looks like there is plenty of room to fit the extra height tires in the wheel wells, and the only thing I see that I might have to do is to set the shocks on one of the higher settings so that they don't bottom out when hitting the bumps and such....
Anyone have any thoughts on this???....I truely welcome any comments to the good or bad...having a few different opinions is great for me to use to determine just what I can and can't do safely, so that I don't break anything on the Gator or me!!!...I learning this stuff as I go along, as I was never an ATV rider before getting my Gator....I went from mini-bikes and motorcycles right into International Scouts and Jeeps on the Farm...they didn't even have those Honda Big Red 3 Wheelers out yet when I was coming up...hahaha!!!
I plan on doing a Tech picture post when I do the Team Aftermarket Clutch installation...I figure that the least I can do to repay, or "give back" for some of the great tech tips I've learned since being on this Forum...maybe it will help someone else who's not sure whether or not they'd want to tackle the upgreade themselves...
Larry in MD :Jestr:
I just ordered a set of after market rims and some 29.5" outlaw II's for my Gator so I will let you know what has to be modified top make these things work, I am hoping they will be here next Tuesday the 15th.
chzbrgr
05-11-2012, 09:27 PM
Looks like Team posted this video on Wednesday.
http://www.youtube.com/watch?v=B6B5gKmI2FU
dieselsmith
05-11-2012, 09:59 PM
So it maxes out @ 44 and 5500 rpm? Now its 50mph and 6,100 rpm? What are the other performance benefits?
chzbrgr
05-12-2012, 03:40 PM
They are claiming an increase in draw bar/ towing capacity, I would think it locks up quicker and stronger than the stock primary. Should make for better throttle response and less rpm in cruising speeds.
dieselsmith
05-12-2012, 04:13 PM
And how much was it gonna be? I like the sounds of this!
chzbrgr
05-12-2012, 05:08 PM
Here you go.
http://teamaftermarket.com/parts-catalog/product/john-deere-825i-idler-primary-clutch-kit-901004
Kiwi06
05-12-2012, 11:45 PM
And how much was it gonna be? I like the sounds of this!
From TEAM Industries (on Friday, 5/11/12):
Steve, thank you for contacting us about our new Drive Clutch upgrade for the Gator 825i! I’m pleased that you enjoyed the video we just released about the kit. The kit (part # 901004) sells for $299.
- Steve from sunny CO
Regulator
05-13-2012, 12:15 AM
The really cool part about this clutch is that it looks like anyone can do the install...I have never been into an ATV or UTV clutch in my life and had no idea what to expect...after seeing the video of the install, I was amazed at how easy it should be...I am getting ready to order the clutch puller tool so that I have it here when the clutch kits gets to me...I don't see anything BUT advantages to this clutch if it does what Team say's it will do...not just for the extra mph, but for the more efficient use of the rpm range, along with it being more fuel effeciant, and a little less noisy getting up to speed...
The real test for me will be the first ride after I install this clutch kit...I hope I am extremely happy with the improvement...they also sell a set of adjustable clutch weights, but I want to see how good just the kit does instead of buying a set of those when I might not even need them...I am like a kid at Christmas now waiting for the Team Clutch Kit to get here!!! :Wlys:
Larry in MD :Jestr:
pahawi
05-14-2012, 12:09 PM
I dont care for higher speed, so on youtube I asked Team industries, if their kit also will reduce RPMs at lower speed. Here's the answer:
"Our set up has the same spring as stock so it does not change your low speed RPMs. We an offer you a different primary spring that will lower your engagement speed and give you a little lower RPM’s at cruising speed. The part # for the spring will be 210350, is black with a purple stripe, and should be available for purchase on our website by the end of this week.".
Paul
purplewg
05-14-2012, 02:20 PM
I for one am not sure I want to invest $300 for " a little lower RPM's". I would like to know what a little lower is. 400-500 is nothing for this motor. I would be more interested in 1000-1500 lower. I read in an earlier post where dieselsmith said it tops out at 44 MPH with the clutch. I don't understand that. Should be the same as the gear ratio wasn't changed on the new clutch was it? If it is the same diameter it should keep the same ratio.
Guess I will have to wait for Larry to report back on what he sees.
morrisok
06-22-2012, 05:24 PM
Why not just put bigger tires on it? I put 29.5 outlaw II's on mine and can now crise comfortablly with out redlining, also increased top end to 52mph, It does throw the spedo out so you will have to use your GPS to see your real speed and the front end has to be lifter 1".
Did antbody ever install this clutch the video is gone and those part numbers dont show up on teams website. Thanks Tim
purplewg
08-01-2012, 09:00 AM
Seems some here ordered and installed one. My opinion is that for a few less RPM's it isn't worth it. I would cut my springs down first to let the clutch engage a little quicker.
jandrold
08-01-2012, 09:07 AM
Morrisok , Post up a pic. of your gator with those larger tires installed.
Jim O.
USMC Ret.
fordafan
11-10-2012, 08:25 PM
Larry Did you ever find clutch springs for more speed at less RPMs? Thanks
I'm bumping this thread back up and hope that someone has actually installed a TEAM aftermarket primary clutch or replaced the rear/driven clutch spring. I've just checked their website and the primary clutch is not available. I'm not sure if they pulled the product or if it's just a website issue.
Does anyone know the model # of the clutches JD is using? Wahl (http://www.wahlracing.com/product.php?productid=20131&cat=297&page=1) has various springs available for the rear/driven clutch. I'm wondering if the black with purple spring is the same as mentioned in the TEAM video. If it is the chart makes it pretty easy to pick another spring to try, and for $25 it's not the end of the world if it doesn't work.
fordafan
11-29-2012, 10:28 PM
I would like to get the engine RPMs down at 15 to 20 mph in my 825.I wonder if one of these springs would do that?
Nathan.duda
11-29-2012, 10:34 PM
I'm pretty sure the reason the rpm's are so high is because the motor is a DOHC. That means the power band is at a higher rpm. If you we're to let the clutch engage at a lower rpm it make the gator a little less zippy. So if that doesn't matter to you, go ahead and do it.
MBDiagMan
11-30-2012, 10:08 AM
You are onto something Nathan. The HP/Torque curve as shown in the brochure indicates an amazingly flat torque curve with max torque reached by 2000 RPM. HP, however, of course rises with RPM. If you're wanting to tow or pull at 2000, it should work, but for it to win a drag race, you'll have to rev it up.
To find out if a new, lighter rear spring would help I would first remove the cover from the clutches and have someone drive the Gator with the bed up or removed while you watch the rear clutch in action. Keep an eye on it to see when it opens up. If the plates on the 825's clutch are fully opened at a steady 15 mph on level ground I don't see any use in proceeding with the rear clutch. But, if they are still closed somewhat then there is something to be gained.
On the golf carts I've done it opens up pretty quickly and I've always gone to heavier springs to get the engine up into it's power band (higher rpm's). So, it is possible that the Gator's rear clutch is also opening pretty quickly in which case you either have to work on the front/drive clutch or go to bigger tires.
fordafan
11-30-2012, 09:29 PM
That sounds like a good plan Dane.I will try that when I get a minute.Thanks.Rick
fordafan
12-01-2012, 04:38 PM
Well I tried Dane's idea today.At 15 mph the belt is down in the secondary clutch about 1 1/4 inches and is a long ways from being fully opened.So I'm thinkin my idea of a lighter spring in the secondary will help for what I want to do.What I don't know is if the Wahl springs will fit or which one to try.I think I will buy one and try it.Will post results.Thanks.Rick
Getting the clutch apart should be no problem. Getting it back together will be a bit annoying. I used a ratchet strap and a board to help compress the spring enough to get the nut back on. I put everything on the shaft and wrapped a ratchet strap around and tightened until I felt the pulley plate bind. Then I used a board to give it a shove. Alternating a few pumps on the ratchet and bumps with the board. Keep in mind that I played with golf cart clutches which are a bit smaller but it should work on the Gator. It's the sort of thing where the first time takes an hour with a lot of cursing and you can do it the second time in 10 minutes.
Do you have calipers or a micrometer, something that could measure the diameter of the wire in your stock spring? If not, can you make friends with someone in your local JD dealers service dept that you could sweet talk into measuring the spring for you?
fordafan
12-02-2012, 10:17 AM
Got the spring out and measured the diameter of the wire (.200) and length of spring (5").That will give me some idea which one to order.Rick
pahawi
12-02-2012, 10:29 AM
Hope you will figure out how to reduce the RPM's at low speed :FX: And remember to take pics through the "take apart - put back together" process :Thmup:
Thanks.
Paul
Do you know the approx outside diameter of the spring?
The stock spring is the weakest listed on the Wahl website but with the diameter you can check industrial sources in addition to what Wahl or Team may have.
fordafan
12-02-2012, 02:23 PM
The spring is 2 3/4" OD.The spring is black with a beige stripe.That color is not on the Wahl list.Rick
perry
12-02-2012, 03:02 PM
My bike is very hard to change gears. I took off the cable and it flows freely, so it's not that. Ant the rpms are very low, so it's not that, sometimes I can change from drive to reverse with no problem, but must time, I have to pull very hard on the leaver to get it out of gear or to put it in gear. Do anyone know or hear of this problem with the 2011 gator 825i
shamus
12-02-2012, 08:19 PM
I also had to pull hard on my shift lever. It finally broke from metal fatigue. The push pull cable sleeve was broke under the black rubber next to the driver seat. I replaced the lever and cable. The dealer said the linkage was out of adjustment. They would try to adjust it every time I took it in. I finally gave up on the dealer fixing it and did myself. I also installed a new Team clutch. Now runs better than new. Dealer did nothing for me.
AMAROK
12-03-2012, 06:26 AM
I also had to pull hard on my shift lever. It finally broke from metal fatigue. The push pull cable sleeve was broke under the black rubber next to the driver seat. I replaced the lever and cable. The dealer said the linkage was out of adjustment. They would try to adjust it every time I took it in. I finally gave up on the dealer fixing it and did myself. I also installed a new Team clutch. Now runs better than new. Dealer did nothing for me.
Hi how goodis the team clutch ? If it's good I'm am going to order one. Thanks
shamus
12-03-2012, 12:37 PM
I have had the Team clutch installed for a month now. Seems better then stock clutch. Lower RPMs and a little more power.The gator is quieter.I had to call Team and get on a waiting list to get the clutch.
perry
12-03-2012, 08:13 PM
You just change the clutch and the leaver was not hard the pull or push anymore.
shamus
12-03-2012, 08:47 PM
The stock clutch was making hard to shift. The lever and the push pull cable broke because of it. You need to see if the dealer will take care of it, if you still have warranty left. My dealer played dumb.
825Gator
12-03-2012, 10:31 PM
This Thread really caught my eye. I would love for the Clutch to lock up earlier. I just don't know much about CVT Transmissions. How hard do you guys think thesee Springs and Weights be to install? I'm pretty Mechanically Inclined just would be very nervous about tearing into a CVT. had my clutches apart,, had to take one of them to auto repair shop and use a press to reassemble it
pcbunn
05-28-2018, 06:08 PM
I've been having nothing but trouble with my 2011 transmission or clutch, I'm not sure where the problem lies but the gator more than occasionally bucks and jerks like something is not working or engaging correctly. I already had the shift lever replaced and some dealer installed upgrade and at least the shifting works but still having the "engagement?" issue. From reading the above comments is this a clutch problem that can be fixed with the Team clutch? Can someone give me the link to the clutch upgrade if that is the problem, Would appreciate getting this thing fixed as my Gator only has 250 hours on it and it sure is aggravating having it not work correctly and yes I have discussed this with the dealer on many occasions and no help. Who would do the install on the Team clutch, the dealer?
825joe
05-29-2018, 06:51 AM
I know they changed some things on the newer 825's as far as clutching. Tighter belt and such. Dealers have had to replace clutches because the earlier models were having engagement issues from what im hearing.
pcbunn
05-29-2018, 12:26 PM
the more I think about it I am doubting that my problem is the clutch. It seems that the bucking and jerking is an engagement issue within the transmission, the spin up in the clutch just throws the weights out to close the beveled drum on the belt, I can understand slipping of the belt but what would cause my gator to jerk and stutter so much? Any thoughts? Hours later, I've just finished using the Gator for work in the back field and functioned ok; this is part of the problem in that the defect comes and goes with no regularity. This naturally makes it hard to pin down the issue which is why I still have this model otherwise I would trade it in on something else.
bradhill
05-30-2018, 10:32 AM
I've been having nothing but trouble with my 2011 transmission or clutch, I'm not sure where the problem lies but the gator more than occasionally bucks and jerks like something is not working or engaging correctly. I already had the shift lever replaced and some dealer installed upgrade and at least the shifting works but still having the "engagement?" issue. From reading the above comments is this a clutch problem that can be fixed with the Team clutch? Can someone give me the link to the clutch upgrade if that is the problem, Would appreciate getting this thing fixed as my Gator only has 250 hours on it and it sure is aggravating having it not work correctly and yes I have discussed this with the dealer on many occasions and no help. Who would do the install on the Team clutch, the dealer?
Check out JD Clutch Doc on Facebook and gatorforums.net. They can fix hard shifting issues and now offer Venom Rooster Performance Shift Kits that will lower the RPMS and increase fuel mileage without hurting the top end.
Powered by vBulletin® Version 4.2.2 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.