PDA

View Full Version : Key controlled positive wire



puggsleys gator
12-20-2011, 11:47 PM
Just wanted to say that my winch install is complete. I installed the 4500 terra superwinch. No drilling used a new mounting plate that as far as I know is the only one out there besides the J.D. Easy to do. Just wanted to let you know the wire you will splice your winch toggle switch and remote plug in switch into is labled 420J and is the smaller of the two yellow wires coming from the gator key switch. BTW I used the 825i xuv service guide I bought off of ebay .. the electrical schematics and all other info. is terrific!

Deputy347k9
12-21-2011, 06:17 AM
How long did the total job take you?

CaptDan
12-21-2011, 02:00 PM
P I C T U R E S Please ?


Dan

jandrold
12-21-2011, 03:48 PM
keyed power wire that is easy to get to is the front attachment plug (c5) driver side under dash , black/yellow wire on a plug, the yellow wire is keyed hot just slide a spade connector into it.

puggsleys gator
12-21-2011, 07:09 PM
I also want to add lights, would this wire under the dash be the one to go to?

jandrold
12-22-2011, 09:13 AM
Yes, it can be used for the controling side but not for powering the large amp draw lights. you would still need to go through a relay, wire size is to small to use on Flood/fog lights, but ok for controling a relay/contactor.

Merry Christmas..... James O.
USMC Ret.

825joe
12-22-2011, 09:29 AM
exactly. The wire under the dash for keyed power is good for just that. :Thmup: