View Full Version : New Bumper
CaptDan
02-15-2012, 06:18 PM
New Prosum Equipment Bumper ....
Everything fit perfect.
http://i1080.photobucket.com/albums/j336/CaptDan/IMAG0591.jpg
http://i1080.photobucket.com/albums/j336/CaptDan/IMAG0592.jpg
and here is my Gator riding buddy as he supervises the instillation of the bumper....
http://i1080.photobucket.com/albums/j336/CaptDan/Luckyintruck.jpg
ratrod
02-15-2012, 06:24 PM
:Thmup:
gomeroh
02-15-2012, 10:00 PM
The bumper looks great!!! Supervisor must know what he was doing!!
plateauman57
02-15-2012, 10:48 PM
nice looking bumper. easy fit and install? cost?
Gator Hunter
02-15-2012, 10:51 PM
Sharp looking bumper! Very nice. And I assume the dump bed clears it fine...?
Great looking dog as well.
CaptDan
02-16-2012, 12:14 AM
Very easy install, everything fit perfectly, mounting holes were already in the frame.
It is actually attached to the frame rail attached tot he underneath of the dump bed, so when the bed dumps, the bumper moves with it.
Cost was $129.00 & shipping ..total $147.98
I'm very happy with it. My supervisor is the best !
Dan
Deputy347k9
02-16-2012, 07:59 AM
Dan
Really nice looking bumper and the cost is exteemely reasonable. Question, is there anyway with this style that you can use the side body protection bars? I like the looks of yours over factry tube and it looks much heavier!
Larry from ME
missouri gator
02-16-2012, 10:51 AM
Dan
That bumper looks great, I pull a trailer with a 2 inch drop style reciever hitch flipped over with the ball on top do you see any clearance issues if I was to install a bumper?
Mark
purplewg
02-16-2012, 01:42 PM
No problem with it hitting the hitch or muffler when you raise the bed? When I was building mine, I soon realized I had to adjust for raising the bed.
CaptDan
02-16-2012, 02:12 PM
Dan
Really nice looking bumper and the cost is exteemely reasonable. Question, is there anyway with this style that you can use the side body protection bars? I like the looks of yours over factry tube and it looks much heavier!
Larry from ME
Larry,
I am don't have the side body protection bars, but I do not see any reason that you couldn't. If you look under your dump bed there are two "frame rails" that support the dump bed and lift with the dump bed, this bumper attaches to the "frame rails" that support the bed. When you look you will see holes already in the rails that this bumper connects to. The supervisor and Son have Gator out today. If you want/need I'll try and get some pictures over weekend.
Dan
CaptDan
02-16-2012, 02:19 PM
Dan
That bumper looks great, I pull a trailer with a 2 inch drop style reciever hitch flipped over with the ball on top do you see any clearance issues if I was to install a bumper?
Mark
Mark,
I know it's hard to see, I have a 2" drop hitch in the mount, turned upside down, just no ball in it at the time I took picture. I took the ball out because I use a chain lock thru the hole for the ball and around a tree when leaving the Gator out in the field over night. There appears to be plenty of clearance.
I called and had son measure (on flat ground) the distance from the bottom of the bumper to the ground and it's 23.5 inches. I'll try and put a ball on over the weekend and make sure, and take pictures if I can.
Dan
missouri gator
02-17-2012, 10:01 PM
Mark,
I know it's hard to see, I have a 2" drop hitch in the mount, turned upside down, just no ball in it at the time I took picture. I took the ball out because I use a chain lock thru the hole for the ball and around a tree when leaving the Gator out in the field over night. There appears to be plenty of clearance.
I called and had son measure (on flat ground) the distance from the bottom of the bumper to the ground and it's 23.5 inches. I'll try and put a ball on over the weekend and make sure, and take pictures if I can.
Dan
Dan, Thanks, sounds like I should be OK on the trailer hitch I like the bumper, think I will order one. If you take some pics that would be great.
Mark
CaptDan
02-17-2012, 11:50 PM
Dan
That bumper looks great, I pull a trailer with a 2 inch drop style reciever hitch flipped over with the ball on top do you see any clearance issues if I was to install a bumper?
Mark
Mark,
I do not think there is any problem with clearance, however if you have the 2" receiver turned upside with a ball mounted, it will hit the bumper if you lift the dump bed all the way. I checked it out tonight, the bumper just misses the hitch turned upside in the receiver.
Dan
WOEII
02-18-2012, 12:57 AM
Very nice CaptDan :Chers:
Been eyeballin that bumper for a while. :lurk:
Nice fur supervisor! :lol: :cool:
Powered by vBulletin® Version 4.2.2 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.