View Full Version : Lots of heat from floorboard of my new 825i
Ficks
06-24-2012, 08:35 PM
Just bought an 825i and wow, the heat from the floor area. I know it is caused by the radiator hoses running throught the area but is there anything that can be done? I didn't notice when I tried one out. You can barely hold your hand on the metal under the console and even the gas pedal is very hot.
srb08
06-24-2012, 09:57 PM
First, welcome to the forum.
Most of the heat problems others have experienced have been caused by the heat from the radiator. Duct tape will seal the openings.
Best,
Steve
Just bought an 825i and wow, the heat from the floor area. I know it is caused by the radiator hoses running throught the area but is there anything that can be done? I didn't notice when I tried one out. You can barely hold your hand on the metal under the console and even the gas pedal is very hot.
I took mine back to the dealer and the service dept. said they never had any complaints but the salesman said he has had many. I am trying for a fix but have not been successful with a solution. The heat issue is my only complaint with my 825
farmerbob49
06-24-2012, 10:29 PM
I really haven't noticed the heat but I haven't logged many miles on mine yet. I did get floor mats with mine and was wondering if perhaps that would lessen
the problem?
Txcoastjason
06-24-2012, 10:46 PM
I have floor mats on mine and it still is hot. There are several holes in the firewall allowing hot air to blow in. I plan on using duck tape and a dynomat type product called thermotec (a little cheaper). I asked my dealer he said some people use spray in liner to solve that issue. It's a free heater in the winter but no fun in summer. This and the air box location (low) are my only complaints. I think when using the tape it's important to tape the removable cargo tray on the front lower side from what I have read and looked at. But others please let me know if I am missing any layups on this issue. Btw. Welcome to the forum ficks.
Txcoastjason
06-24-2012, 10:49 PM
Oh and it also looks like there is a trough in the plastic on each side between the cargo box and the fenders that looks like it needs to be filled. Thinking about using some kind of foam or weatherstripping something in there. All on my not yet completed project list.
cryoman16
07-05-2012, 06:39 PM
it will not get any better, i have tried duct tape, floor mats etc nothing works very poor design by JD & they really do not care
2255puller
07-05-2012, 08:26 PM
Get used to it. I try to ignor it until fall and winter.
srb08
07-05-2012, 09:43 PM
I wonder why this is a problem for some gator owners but not others? I was out yesterday for about two hours in mine. Speed ranged from 5 to 25 mph. I was wearing shorts and crocs. I felt some warm air coming through the firewall but it was never uncomfortable. The outside temp was 104.
I wonder if JD made some type of design change along the way that allowed more hot air to flow into the drivers side of the passenger compartment?
My gator was built in Dec of 2010.
I realize that I'm grasping at straws here but there has to be a reason why some have this problem and others don't.
Ficks
07-06-2012, 11:34 PM
I have tried several things so far but still a lot of hot air coming through. Other than that I love it so far.
Everyone that rides in the summer has this problem, if not they have no feeling in their legs
I wonder why this is a problem for some gator owners but not others? I was out yesterday for about two hours in mine. Speed ranged from 5 to 25 mph. I was wearing shorts and crocs. I felt some warm air coming through the firewall but it was never uncomfortable. The outside temp was 104.
I wonder if JD made some type of design change along the way that allowed more hot air to flow into the drivers side of the passenger compartment?
My gator was built in Dec of 2010.
I realize that I'm grasping at straws here but there has to be a reason why some have this problem and others don't.
pahawi
07-07-2012, 06:02 PM
How about reversing the power to the fan, so it blows through the radiator and away from the firewall? Yeah yeah I know, probably not possible, so stupid me :Nnd:
RMOSSSO1
07-07-2012, 06:44 PM
Pahawi:
Years and years ago, on Caterpillar bull dozers, I can vividly remember having a mechanic turn the fans and reverse the air flow, much like you describe above. I am going to do a smoke test on my machine and see which way the air flows when the fan is engaged. Presumably it is from the outside in, aka front to back. Not sure about low voltage, but it does seem logical that a reverse flow would help, IMHO!
my first time to the forum. Unfortunately my new 825i blows the hot air on the feet also. Obviously john deere does not give a crap that this is a problem. It looks to me from the forums this has been going on since it came out in 2010! The dealer can only be as good as the company behind him. All john deere says is that they are working on the problem. However, it seems you cannot get a number so you can speak to these people in person. I think john deere is lucky that it doesn't happen right away or they would not sell many of these. John Deere, Please Fix this problem. This is a great machine!
GATORDONE
08-09-2012, 10:57 AM
Goggle johndeerefeedback, Under contact forum fill out info and it will be sent to the correct factory for review, You will be sent a reply back from deere. The more people that do this will let deere know that this is a world wide problem. "numbers = results" :Ysnd:
825joe
08-09-2012, 11:16 AM
mcfr I don't think it is a matter of they don't give a crap. In the grand scheme of things how severe is the issue. Think about it.
CaptDan
08-09-2012, 11:24 AM
mcfr I don't think it is a matter of they don't give a crap. In the grand scheme of things how severe is the issue. Think about it.
I was just going to post a similar comment, and I do not want to offend anyone here, but really how bad is is? I have my own gator, have used a loaner and a couple of friends have them. I did not even notice the heat until after it was mentioned on here.
I use my gator almost every day all summer, have 175 hours in a year.
It did explain why my cold drinks were getting warm so quickly !
Dan - NJ
825joe
08-09-2012, 11:56 AM
I hear you Dan. That is what I am getting at. Not that it is not a valid complaint but with the new machines coming out it is probobly one of those issues that is on the back burner for JD. Which I can understand. :cool:
ncbowhnter
08-09-2012, 05:08 PM
I usually wear croc flip flops when driving my gator around. I don't notice any excess heat until I get up around 30mph. I guess the speed really forces the hot air in on my feet. I would compare it to dunking my feet into a bucket of hot grease that you would usually use to fry up some chicken or something. Well, not literally, but it is unbearable.
Needless to say, I don't drive too fast very often. When I have my windshield on, it makes it a lot worse.
Thanks ncbowhunter, 825joe and captdan. We are using it at the lake and driving between places. I use it for up keep at the acreage and I have to keep down weeds and for planting and discing. When driving down the road I have to stop every 3 or 4 miles because the heat is so bad on the feet that I can't keep it on the gas pedal. I agree that once the cold weather comes it won't be a problem, but when I use it as much as I do it is a problem.
Ficks
09-02-2012, 10:33 AM
Well, I stopped the biggest part of it by using a strip of foam insullation on top of the plastic container under the hood and using black duck tape in other areas. I used reflective insullation pad under the cup holder (console) and that pretty well took care of that. When cold weather gets here I will just take off the foam insulation under the hood and be ready to go.
Well, I stopped the biggest part of it by using a strip of foam insullation on top of the plastic container under the hood and using black duck tape in other areas. I used reflective insullation pad under the cup holder (console) and that pretty well took care of that. When cold weather gets here I will just take off the foam insulation under the hood and be ready to go.
Send us a picture of what you did!
IdleUp
09-29-2012, 01:37 AM
The heck with stopping the hot air from entering the cab - I would like to know how to get more of it for this winter - is there a panel I could leave out to get more heat - I'm not spending $500+ on that goofy looking heater!
Thanks
RMOSSSO1
09-29-2012, 07:37 AM
Be patient, your ole GATOR will keep you warm!... Mine does in PA at 3000 feet elevation.:hdscrh::Kaffee::hdscrh:
Txcoastjason
10-07-2012, 12:47 AM
I knocked a substantial amount of heat away removing the cup holder assembly and covering the round hole that funnels hot air from underneath the firewall with thermotec (like dynomat). I also used it under my floor mats and used weatherstripping to cover holes and channels. And more thermotec under the tray below the hood and over those firewall holes. The residual heat now comes from the firewall heating up just above the floor mats to the firewall which is a project I will have to complete later (thinking thermotec mat and painting it black after with some rubberized paint). All in all, things are better but despite what some people say... These engineering oversights get annoying. These things cost as much as a small car. Hopefully the engineering team will spend some time reading post on these forums.
IdleUp
10-07-2012, 11:11 AM
Well it was around 60 degrees yesterday when we went for a ride and the leakage kept us nice and warm - while I was driving I felt hot air coming in from under the dash - I would really like to put an adjustable vent under there for a heater for winter use - any ideas?
Thanks
Txcoastjason
10-07-2012, 06:20 PM
Well, it's pretty easy to take out the weatherstripping I placed from under the front hood... But there is a circular cutout in the firewall beneathe the cup holder assembly (where a lot of heat gets funneled from the radiator). It would be too far fetched to mount some sort of duct assembly...if anyone has ideas it would be cool to hear them.
IdleUp
10-07-2012, 06:26 PM
Well, it's pretty easy to take out the weatherstripping I placed from under the front hood... But there is a circular cutout in the firewall beneathe the cup holder assembly (where a lot of heat gets funneled from the radiator). It would be too far fetched to mount some sort of duct assembly...if anyone has ideas it would be cool to hear them.
Isn't the cup holder on the floor between the seats on the 825?
Powered by vBulletin® Version 4.2.2 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.