View Full Version : Hitch receiver for rear brush guard?
kmjd44
11-05-2012, 01:22 PM
I just bought a DR RapidFire log splitter and I can't hood it to the normal hitch on the back of my 855d - does anyone know if someone makes a hitch receiver that bolts to the horizontal surface of the rear brush guard? It looks like the slots in that surface were made fr something to bolt onto it
Skillet23
11-05-2012, 06:41 PM
I put a Hitch extender in my rear receiver hitch so that it's easier to hook up a trailer or other item.
https://www.curtmfg.com/CURTLibrary/45791/images/45791_1024x768_a.jpg
or one like this that my dad uses -
1715
Right now it has my cargo carrier in it so I can easily throw a deer on it.
http://www.johndeeregatorforum.com/forum/attachment.php?attachmentid=1523&d=1349385417
You can see the receiver without the cargo carrier in it.
http://www.johndeeregatorforum.com/forum/attachment.php?attachmentid=1038&d=1334113342
Older picture with cargo carrier attached.
Maybe something like that will work for you?
David in TX
kmjd44
11-17-2012, 11:11 AM
I ended up getting a hitch extender and a bar with an 8 inch drop that I turn over so the log splitter sits level. I was worried that there would be too much play in the hitch with the extender but it works very well - I'm happy with it
srb08
11-17-2012, 07:45 PM
I ended up getting a hitch extender and a bar with an 8 inch drop that I turn over so the log splitter sits level. I was worried that there would be too much play in the hitch with the extender but it works very well - I'm happy with it
I did exactly the same with a 4" drop hitch. It works well. The only draw back is that you must reduce your tongue weight with the extension.
I only use the extension for pulling a 34 ton log splitter so it's not a problem. If you are going to be pulling a heavy trailer you might need to go to a bumper mount hitch.
jdcellar
11-17-2012, 10:24 PM
I had the same probelm when I tried to hook up my log splitter. I welded a 12" extension on the tongue of the log splitter.
apple
11-18-2012, 09:12 AM
Northern Tools has hitch extensions. They have 2 different lengths. I use one to pull items with so if something is tongue heavy I won't smash my hand or worse yet damage my 825i
Powered by vBulletin® Version 4.2.2 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.