View Full Version : Oil filter nightmare
DIXIEDOG
11-11-2012, 11:08 AM
Just in case anybody was wondering, the oil filter on the 825i coming from the factory is still heck to get off.:lol: I just did my first oil change and needed several different kinds of channel locks to get it done.:Bnghd:
pcbunn
11-11-2012, 12:28 PM
For those who don't know; It's easier to remove the filter with the JD filter wrench. I think mine cost about $5.00 at the local dealer.
Destiny creek
11-11-2012, 08:34 PM
Is that the one that fits over the end of the filter to remove it
osiris
11-11-2012, 09:50 PM
oh the joys of that first oil change, the 300 lb gorillia working on the gators must be getting some big forearms if there still that tight :skep:
denisf
11-11-2012, 09:51 PM
Is that the one that fits over the end of the filter to remove it
Yes it is...and it's worth the few bucks.
denisf
11-11-2012, 09:53 PM
oh the joys of that first oil change, the 300 lb gorillia working on the gators must be getting some big forearms if there still that tight :skep:
That's what happen when you don't lube the seal. Same bull on all our new Cat equipment (every two years). The first service is a royal pain.
LeonardS
11-12-2012, 04:38 PM
I use a JD strap type filter wrench like I use on the full size tractors. It makes the removal job much easier.
Deputy347k9
11-13-2012, 12:04 AM
Dixidog, welcome to club, we all have been in your shoes. I think it's part of John Deeres theft control. Put the darn filter on with an impact wrench and no one will pocket them! LOL. I have now changed my oil 6 or 7 times and it's a breeze seeing I lubricate the seal and install using just hand power. Taking the filter off for the first time may just cause you to cuss like a sailor.
Larry in NC
DIXIEDOG
11-13-2012, 08:12 PM
Yep....I always thought Ford trucks were bad about that first oil filter but they are easy compared to the JD one. :lol: In hindsight I'm thinking the first thing I should have done when I brought my Gator home is remove the filter, lube the seal and put it back on.:jm:
MBDiagMan
11-14-2012, 08:22 AM
Yes, it's tough to get at. No room to maneuver a giant size pair of channel locks or even a pair barely big enough to grab the filter.
I used a three prong universal wrench that has a 3/8" drive connection. It takes two hands, one on the three prongs to get them in place while applying torque to the ratchet with the other hand. A bit of a hassle, but it worked. I expect subsequent changes will be easily doable by simply twisting off the filter by hand since the factory gorilla didn't put it on.:lol:
Powered by vBulletin® Version 4.2.2 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.