View Full Version : Grease Gate.r
calif.33
12-01-2012, 11:45 PM
For you that have the 825i with the grease fittings I have found a grease coupler that you can use and don"t have to take wheels off.A right angle grease coupler SEA-4J90C phone 800 588 8480 . On the grease fitting on the rear of the drive line I drilled a 3/4 in hole in the cover to line with fitting so now I just turn the drive line till it lines up and grease it.
RMOSSSO1
12-02-2012, 09:56 AM
calif.33:
I have a similar 825i machine with a zillion zerks. Let us call this 825i the original vintage. It is my understanding that later models have no grease fittings in the suspension and steering. I have greased mine several times. Makes ya wanna kick your dog!
But then I thought, I sure would like to have the sealed joints/no zerks. AND then, I drove thru an 8'' stream bed, then thru wet snow, and then more mud, and I thought, MAN, it is a good thing I got those zerks to grease!
OH, calif.33, my hometown was Latrobe, PA and the home of Rolling Rock beer which carried the number 33 for many years. Is yours just sequential for calif?
Rich :Ysnd::Nnd::Ysnd:
DIXIEDOG
12-02-2012, 11:26 AM
I don't have the zerks but I would like them....all the literature stated zerks and the salesman stated it had all the zerks....I was a bit PO'd the first time I crawled under with a grease gun.....I got one grease fitting and even that is under the alternator shield.:Nnd:
It's nice to not have to do anything maintenance wise but I fear they will not last nearly as long as if they had zerks and were properly greased.
calif.33
12-02-2012, 05:17 PM
33 is the year I was born. I found the name of the company that I got the coupler from.:mad: Products 800 588 8480
calif.33
12-02-2012, 05:18 PM
Sae products
RMOSSSO1
12-03-2012, 09:15 AM
:Chers:calif.33:
You are my hero! Every time I go out on the GATOR, I feel how lucky I am. Smooth, soft suspension. Speed, not too much, just right. Manueverability. All the good features. Then when I return, I still have a stiff, sore back. And to think, I was born in '43!
Yep, like I said first, at 79, you are my hero!:Chers::cool::Chers:
MBDiagMan
12-03-2012, 09:48 AM
WOW! I don't run around in too many crowds where it's me that is the youngster!:BG: Born in '49.
So far the Gator hasn't hurt my back and I've gone fast on some pretty pock marked gravel roads.
It seems like I read that my late 825i, (delivered in October) only has grease fittings in the CV joints. Is this correct?
RMOSSSO1
12-03-2012, 01:53 PM
I ordered mine in the summer of 2010. The MSO shows billing date of September 27, 2010. It shows that it is a 2011 model, which is the first model year for the 825i.
Regarding the zerks, I got 'em all. When I grease it, I take my big book and maintenance book and go to town. I am working on a lift device in my garage which will simplify. I know I must have half a dozen ends for grease and I use them all.
MBDiagMan: In the next six years you will find many problems, more with your body than with your GATOR. Just think your 64 year old body is like a motor vehicle. The drive chain will need rebushed (i.e. either hip or knee replacement); The exhaust system could need repair (use your own conclusions). The ignition, hydraulic, electrical system will start faiing.
As you are from TEXAS, all I can say that is good, is that the DONUT HOLE gets smaller, and you can get a free pair of shoes in you have ankle problems; except, if y'all secede from the GOOD OLE USA!!!!
I am waiting for our 79 year old to chime in. He still is the MAN! :OhNoes::jm::OhNoes:
MBDiagMan
12-03-2012, 03:49 PM
I ordered mine in the summer of 2010. The MSO shows billing date of September 27, 2010. It shows that it is a 2011 model, which is the first model year for the 825i.
Regarding the zerks, I got 'em all. When I grease it, I take my big book and maintenance book and go to town. I am working on a lift device in my garage which will simplify. I know I must have half a dozen ends for grease and I use them all.
MBDiagMan: In the next six years you will find many problems, more with your body than with your GATOR. Just think your 64 year old body is like a motor vehicle. The drive chain will need rebushed (i.e. either hip or knee replacement); The exhaust system could need repair (use your own conclusions). The ignition, hydraulic, electrical system will start faiing.As you are from TEXAS, all I can say that is good, is that the DONUT HOLE gets smaller, and you can get a free pair of shoes in you have ankle problems; except, if y'all secede from the GOOD OLE USA!!!!
I am waiting for our 79 year old to chime in. He still is the MAN! :OhNoes::jm::OhNoes:
Shhh.... Say all this quietly. My body might hear me while I'm reading it.:lol: I've been EXTREMELY lucky with my health. I have no joint or back problems, take no medicine and all the plumbing even works. I even get to keep my wife happy:BG: I'm VERY lucky and I know it.
Every two years I get worried as I get closer to my flight physical. Sooner or later I won't be able to pass a flight physical and will have to give it up. It's coming up in March. I'm keeping my fingers crossed.:Thmup: That said, if I have to give up flying but I can still keep my wife happy, it won't be all bad.:BG:
RMOSSSO1
12-03-2012, 08:50 PM
The moderator can knock this one off, but it is too funny and appropriate, not to reply, to wit:
MBDiagMan:
Following your lead above, which must be confirmation of what I heard one time in Joplin, MO, from a Texas fella driving a load of Class A Explosives, he said:
Some men walk up to a girl and put it in,
I'm from Texax and I put it in and then walk up to the girl!!!
Whatever, keep eating your Cheerios. Flying is probably fun, but aim more for your marital happiness.
:Blsh::lurk::mad::Eek::OhNoes::Eek:
Zephyr74
02-06-2013, 02:05 PM
For you that have the 825i with the grease fittings I have found a grease coupler that you can use and don"t have to take wheels off.A right angle grease coupler SEA-4J90C phone 800 588 8480 . On the grease fitting on the rear of the drive line I drilled a 3/4 in hole in the cover to line with fitting so now I just turn the drive line till it lines up and grease it.
I called SAE and they wanted over $30 just for the fitting! Where did you buy it from and for how much?
GATORDONE
02-07-2013, 10:19 AM
I installed 45 degree grease zerks and can get the grease gun on them with no problem.:Thmup:
Powered by vBulletin® Version 4.2.2 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.