PDA

View Full Version : Winch



LittleHoss
12-03-2012, 10:05 AM
Getting ready to pull the trigger on a new winch for the XUV 825i. What seems to be the most popular on this site? I don't mind the cost but want something that will last and fits in the winch area without fab work.

Thanks in advance!

MBDiagMan
12-03-2012, 11:19 AM
A few guys I work with have bought and used ProMark with success. I think that's what I'm going to get.

Anyone want to suggest a capacity for an XUV 825i? I'm thinking 3,500. That's double the empty weight of the vehicle.

CaptDan
12-03-2012, 12:40 PM
I have the Warn 4,000 winch.


Dan NJ/PA

LittleHoss
12-03-2012, 02:45 PM
I have the Warn 4,000 winch.


Dan NJ/PA


Did the Warn 4,000 winch fit without mods? If so what model do you have?

Zephyr74
12-03-2012, 03:00 PM
Did the Warn 4,000 winch fit without mods? If so what model do you have?

Yes, if you get a winch mount plate from Cambridge metals it will fit the 825i and a warn 40. I bought the Cambridge Metals winch mount plate and the Warn XT 40. Love it.

lodogg1971
12-03-2012, 03:19 PM
Went buy a 825i today. the dealer wanted to sell me a Talon 3500# winch for $600 installed. Anyone know of this brand. This seem high, cus i found it online for $143 (w/o mounting bracket)
Could all the guys with experience direct us with what you've learned? (I opted not to buy the winch today)Thanks!!!

MBDiagMan
12-03-2012, 03:42 PM
Sounds like a good decision lodogg! You could even buy a Warn for that, install it yourself and have money left over. If you need to have it done, you still might be able to save money and have a higher quality winch.

I'm also anxious to read feedback on this subject.

osiris
12-03-2012, 03:53 PM
im running a superwinch 3500 on the front reciver and hookups in the rear for it so I can winch myself out or through a problem area. I also have a 10,000lb winch on the front of my truck with hookups in the rear. Never understood why a person would mount the winch perm. on the front with nothing in the rear only concern would be approch angles that I can figure

LittleHoss
12-03-2012, 08:45 PM
Yes, if you get a winch mount plate from Cambridge metals it will fit the 825i and a warn 40. I bought the Cambridge Metals winch mount plate and the Warn XT 40. Love it.

I like the Warn XT40 for sure price is fair. I can't find anything online about this mount plate from Cambridge Metals. Do you have a link or any further information on the part. I am very interested in this set up.

CaptDan
12-03-2012, 09:10 PM
The KFI winch mount works with the Warn XT40 winch without any modifications at all. However, I did modify the mount slightly to meet my personal preference to do it my way as they say. Additionally I installed two (2) switches in the dash using marine grade switches that fit in the existing openings in the dash perfectly. The bottom switch is a power on/off switch to the winch and the top switch is a momentary on switch that controls in/out operation of the winch. I just did not like the switch provided by Warn.

Photos of my install.182318241825

shamus
12-03-2012, 09:23 PM
Here you are http://fuse-powersports.amazonwebstore.com/John-Deere-Gator-825i-XUV-UTV/M/B0072J0EAS.htm?traffic_src=FIND&utm_medium=CSE&utm_source=FIND&affId=the005-20

lodogg1971
12-04-2012, 03:26 PM
I think I will give the Superwinch Terra 45 a shot. I found it online for $209. The mounting plate I will try is made by Promark offroad. I contacted them and the plate is $55 w/ no modifications needed. Anyone that mounted the Superwinch if you have some time please provide some details that I may need to know during installation. Also, how much time does the installation take? Again, Thanks!! (This machine is a xmas present for my son)

pwshepard
12-04-2012, 07:39 PM
You can check out my write up on my Terra 45 install here: http://www.johndeeregatorforum.com/forum/showthread.php?10395-2011-825i-Winch-install/page13

Hope it helps.

pwshepard
12-04-2012, 07:41 PM
You can check out my write up on my Terra 45 install here: http://www.johndeeregatorforum.com/forum/showthread.php?10395-2011-825i-Winch-install/page13

Hope it helps.

Gator Joe
12-04-2012, 08:19 PM
I am also in the market to buy a winch. I like Osiris's idea, being able to pull your self out either way. Where did you get the rear wiring kit. Do you have pic's of the rear hookups. Thanks Gator Joe

Destiny creek
12-08-2012, 01:12 PM
Only thing I don't like about using the hitch receiver to mount the winch in is the fact that if you sink the machine in the mud the receiver is so low and out of the way you need a shovel to dig it out to install the winch especially in the back. And if in the winter the receiver is usually frozen with mud and snow

MBDiagMan
12-10-2012, 08:49 AM
Thanks very much Shepherd for taking time for the pictures and the write up and for taking time to link it here. Have you used the winch for anything yet? This all appears to be a good value and a clean install. I think I'm gonna talk to Santa Claus.:BG:

Doc

pwshepard
12-13-2012, 10:03 AM
Thanks. I've only used it to pull a large log out of a road so far. It worked great the winch is really strong compared to the one I had on my ATV.

Landscaper
12-13-2012, 11:12 PM
I built a front/rear mounting plate for my Warn XT30 winch. but......havent had time to wire it up yet
(winter project but our first child is 1 month old so we are busy!!!)

GatorOwnerx4
12-14-2012, 02:24 PM
A few guys I work with have bought and used ProMark with success. I think that's what I'm going to get.

Anyone want to suggest a capacity for an XUV 825i? I'm thinking 3,500. That's double the empty weight of the vehicle.

John Deere's OEM winch is 3000 pound.

http://www.greenfarmparts.com/John_Deere_WINCH_3000_LB_BUMPER_MNT_BM23104_p/bm23104.htm

osiris
12-16-2012, 07:42 PM
Gator Joe: i picked up the quick disconnects and wire at fleet farm, tied them to the front wiring connections
http://www.fleetfarm.com/mff/search/?q=quick+connect&searchSubmit.x=0&searchSubmit.y=0 and some pics, sorry for the crappy quality of the rear pic but u get the point 18581859