PDA

View Full Version : Long Range Lights



Bunky
09-14-2013, 08:24 AM
In researching lights including John Deere, I found this image of the long range lights. I count at least 7 connections plus a fuse pigtail. I am sure if someone who installed non-Deere you would not need so many connections -- just power, switch, and attachment to the lights. There is also a relay in this somewhere. I can see why the kit is expensive.

Any idea why so many?

http://angphoto.smugmug.com/Detailing/ANG-Gallery/i-M35X5FW/0/L/BM23120-L.jpg (http://angphoto.smugmug.com/Detailing/ANG-Gallery/21491530_hZVwBD#!i=2764633432&k=M35X5FW&lb=1&s=A)

jradue
09-14-2013, 11:57 AM
JD engineers all the electrical connections. When you connect to the gator power connector, they usually add a pigtail to replace the power connection so you can add connect additional loads at a later date. Most of the stock lights that come with the gator are connected to a single circuit. When you add additional lights, it needs to connect to the front options power circuit. Therefore they add all the additional stuff. That kit may tie in to the display panel also so it indicates if the long range (high beam) lights are on.

jradue
09-14-2013, 12:01 PM
Actually, does this kit extend a new circuit from the battery? My JD worklight kits did.