View Full Version : 825i lift kit
number3shot
07-01-2014, 11:53 AM
Installed bracket type lift kit from allterrainonline on my 2011 825i. Got some lift but was hopping for more. Saw the spring spacer lift from Super ATV so installed that also.
Got pretty good lift now, but noticed the camber seems exagerated now. Of course I don't know what it looked like before.
Anybody out there have these lifts on their machines or have any idea if I have/could create problems using both?
Thanks
DIXIEDOG
07-01-2014, 08:37 PM
I wouldn't go over 2" total lift on one...you get camber issues....cv issues and ball joint issues. Not to mention that unless you're tires are hitting you give up your offroad ability with more lift. You want the lowest center of gravity you can get for the actual clearance gain.
number3shot
07-02-2014, 07:49 AM
I wouldn't go over 2" total lift on one...you get camber issues....cv issues and ball joint issues. Not to mention that unless you're tires are hitting you give up your offroad ability with more lift. You want the lowest center of gravity you can get for the actual clearance gain.
Camber definitly doesn't pass eyeball test.
Thanks for your reply.
duling
07-02-2014, 11:11 AM
How's it ride? I'd love to do the All terrain kit but I worry about the ride.
number3shot
07-02-2014, 11:15 AM
How's it ride? I'd love to do the All terrain kit but I worry about the ride.
Could not tell any difference in ride after allterrain kit installed.
I'll probably remove alterrain and go with Super ATV lift only because I have to take springs somewhere to have compreesed.
Skillet23
07-09-2014, 07:26 PM
I got a strut spring compression tool from Harbor Freight when I was putting spring spacers on my Gator. It works well...
http://www.harborfreight.com/macpherson-strut-spring-compressor-set-61654.html
David in TX
number3shot
07-09-2014, 09:47 PM
Ha!!
$12.99. I gave the guy at Fire Stone twenty bucks to put the spacers on for me.
BTY Skillit, what is the customized back splash on your Gator and did you put the spring spacers on the rear too?
Skillet23
07-09-2014, 11:34 PM
Yeah I put the spring spacers on the rear too. But, I am probably fixin to remove them. I need new shocks, so while changing shocks I am gonna get new springs to help with loads and I am gonna put on a bracket lift - thus, no need for the spacers.
The backsplash - a friend of mine is a sheetmetal worker, so he got some metal and took my Gator to his house and built a backsplash for me to help keep all the dust from rolling into the cab from between the bed and the cab. It works great, but I need to add a couple more deflectors under the edges of the seat to keep the dust from rolling in from below.
3109
3110
3111
Hopefully you can see the above pictures.
David in TX
zr2blz
07-14-2014, 01:13 AM
I got a strut spring compression tool from Harbor Freight when I was putting spring spacers on my Gator. It works well...
http://www.harborfreight.com/macpherson-strut-spring-compressor-set-61654.html
David in TX
I just did the 2" lift on my S4. I also got the harbor freight tool, but I ground down some parts to make the tool fit these 'small' springs to help get tool between coils and not hit center of shock.
scoobieguy
07-13-2015, 07:15 PM
I just did the 2" lift on my S4. I also got the harbor freight tool, but I ground down some parts to make the tool fit these 'small' springs to help get tool between coils and not hit center of shock.
Glenn 1 year later do you have any problems with CV joints / axles with the 2in lift on your 825i S4?
Did john deere give you grief for service / warranty claims?
I'm considering the same setup
Thanks
duling
07-14-2015, 08:34 AM
I have the front lift brackets but I haven't installed them yet due to worries that they are going to have some effect on my snowplowing. I am going to get the boss plow this fall and was wondering if anyone could think of any possible issues with the shock relocation bracket lift and the boss plow setup? I personally can't think of any but I'm a far cry from an expert. Thanks in advance for any advice.
zr2blz
08-13-2015, 10:32 PM
Glenn 1 year later do you have any problems with CV joints / axles with the 2in lift on your 825i S4?
Did john deere give you grief for service / warranty claims?
I'm considering the same setup
Thanks
Well, haven't driven it much. Son (lives in CA) took it out and put 30 miles on it last Nov or Dec. I've put 3-4 miles on it. I drove it over my lot and it higher lift doesn't touch the rocks like it did before. Need to take it on a trail but nothing in the works this year. Son got machine for us as xmas gift in Jan 14. It just sits in garage. :Cnfsd: (been driving our '69 Z28 more this summer, we got it new):FX:
Powered by vBulletin® Version 4.2.2 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.