PDA

View Full Version : Adjusting valves



jdieter
12-29-2015, 03:49 PM
At the 200 hour service interval that suggests a valve adjustment for a 625i. Of course nothing in the operators manual, best I can find on a service manual is about $140 at dealer or $70 online for a cd. Did find some info online for older carbureted engine, but mine is fuel injection so finding TDC didn't apply. Does anyone have the valve lash spec and how to identify which is the #1 cylinder to rotate it to TDC. I own and maintain a 51 chevy and it's a simple adjustment once you know the spec and get #1 set to TDC, no idea why it such a secret on the Gator.

jdieter
12-29-2015, 07:01 PM
I did find the spec for valve adjustment. It's in 2 places, on one of the engine valve covers and on the side of the chassis by the ID plate.

200mph
12-29-2015, 09:33 PM
Here's a generic procedure that can be used on any 2 valve motor.

Turn engine in direction of normal rotation.
Exhaust Opening - Adjust Intake
Intake Closing - Adjust Exhaust

jdieter
01-01-2016, 01:22 PM
200mph, pretty much followed that, set clearance to spec when tappet gap was the greatest.

jdieter
01-02-2016, 11:01 AM
For a kawaksaki FD620D engine service manual go to www.mymowerparts.com (http://www.mymowerparts.com)