Results 1 to 2 of 2

Thread: JD Recommends Synthetic Plus-50 II Premium Engine Oil (SAE 0W-40) For The RSX850i.

  1. #1
    Administrator WOEII's Avatar
    Join Date
    Apr 2010
    Location
    Syr/NY--->Clw/FL
    Posts
    4,766
    Thanks
    36
    Thanked 233 Times in 218 Posts

    Post JD Recommends Synthetic Plus-50 II Premium Engine Oil (SAE 0W-40) For The RSX850i.

    Stopped into the local JD dealership here to check on my tractor being repaired and asked about my RSX oil change because the break in oil is almost at it's hour change. They strongly recommended using JD Synthetic Plus-50 II Premium Engine Oil (SAE 0W-40) For The RSX850i. Because this is a high output motorcycle racing engine it needs to have the best oil. Also because of this fact starting and just taking right off cold is not the best for any engine but starting an engine and let it warm up some before heading out is just good preventative maintenance.
    Below is the info on the oil.


    John Deere Plus-50 II Synthetic Blend Motor Oil 0W-40 -
    Quarts = TY26665 - Gallons = TY26664

    Description
    John Deere Plus-50 II Synthetic Blend Motor Oil 0W-40

    Synthetic Plus-50 II Premium Engine Oil (SAE 0W-40) has been designed to provide advanced lubricant performance in modern engines to meet the requirements of EPA regulations. SAE 0W-40 Plus-50 II is a full synthetic PAO (Poly Alpha Olefin) based oil to provide excellent performance.
    Applications


    • Excellent for all diesel engines requiring 0W-40 viscosity and API Service Classification CJ-4, SM, and Mack EO-N Premium Plus 03. Superior performance for customers who operate in extremely cold conditions and want to maximize engine life and performance.

    Features and benefits

    • Unique to John Deere – formulated with exclusive Plus-50 II additive and 100% PAO (polyalphaolefins) synthetic base oil
    • Excellent for other brands of diesel engines
    • Excellent for all automotive heavy- and light-duty diesel engines
    • Synthetic base stock with the Plus-50 II additives provide excellent performance in a temperature range of -40?F to 122?F (-40?C to 50?C)
    • Additive package reduces engine wear and provides superior protection against high-temperature thickening as compared to competitive oils – offers additional protection in neutralizing corrosive acids formed as by-products of combustion
    • Formulated specifically to inhibit oxidation, deposit, corrosion, and wear with superior soot control
    • Performance is equal to Plus-50 15W-40 in wear reduction and antioxidation tests
    • Provides maximum sludge and varnish control
    • Superior low-temperature fluidity reduces engine startup wear in cold weather
    • Drain intervals may be extended up to 500 hours when used with John Deere oil filters in John Deere engines
    • Reduces maintenance costs and downtime, and extends engine life
    --------------------------------------------------------------

    MATERIAL SAFETY DATA SHEET

    1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
    Product Name: John Deere Plus-50 II 0W-40
    Product description: API CJ-4 Engine Oil/Lubricant
    MANUFACTURER: EMERGENCY TELEPHONE NUMBERS:
    Northland Products Company Chemtrec: 1-800-424-9300
    1000 Rainbow Drive
    Waterloo, IA 50704
    319-234-5585, 1-800-772-1724
    ----------------------------------------------------------------------
    2. COMPOSITION/INFORMATION ON INGREDIENTS
    wt. Percent CAS Registry #
    Synthetic Base Stock >78 068649-12-7
    Zinc alkyl dithiophosphate < 2 068649-42-3
    Proprietary Additives <15 Trade Secret
    Acrylic Copolymer < 5 Trade Secret
    ----------------------------------------------------------------------
    3. HAZARD IDENTIFICATION
    Emergency Overview:
    Clear, Amber, Liquid. (May be dyed or odor masked.)
    Health studies have shown that petroleum hydrocarbons pose
    potential human health risks which may vary from person to
    person. Exposure to liquids, mists, vapors and fumes should
    be minimized.
    POTENTIAL HEALTH EFFECTS:
    INHALATION:
    Vapors are minimal under normal conditions but should be
    avoided, concentrations may reach levels that could cause
    slight irritation.
    EYE CONTACT:
    May cause slight temporary eye irritation. Corneal injury
    is unlikely. Vapors or mists may irritate eyes.
    SKIN CONTACT:
    May cause skin irritation. Discontinue use if irritation
    persists.
    INGESTION:
    Ingestion of oil may irritate the digestive tract and could
    cause diarrhea. Single dose oral toxicity is greater than
    5000 mg/Kg in rats.
    OTHER:
    The TLV has not been determined for this material. The ACGIH TLV
    and the OSHA PEL for oil mists are both 5 mg/cubic meter.
    Hazardous Material Identification System (HMIS):
    Health-1, Flammability-1, Reactivity-0 (Based on components)
    John Deere Plus-50 II 0W40
    Page 2 of 5
    ----------------------------------------------------------------------
    4. FIRST AID MEASURES
    INHALATION:
    Remove the victim from the area to fresh air. Call a
    physician. Give oxygen if victim is breathing hard.
    EYE CONTACT:
    Flush eyes with large amounts of water immediately for 15
    minutes or until irritation subsides. If irritation
    persists, get medical attention.
    SKIN CONTACT:
    Wash affected areas thoroughly with soap and water. Remove
    contaminated clothing and wash them before wearing again.
    Call a physician if irritation persists.
    INGESTION:
    Call a doctor immediately. Do not induce vomiting unless
    directed to do so by medical personnel. Never give anything
    by mouth to an unconscious person.
    ----------------------------------------------------------------------
    5. FIRE FIGHTING MEASURES
    Flash point : 390oF (COC)
    Flammable limits : Not Available
    Auto-ignition Temperature: Not Determined
    GENERAL HAZARD:
    May release vapors that form flammable mixtures when
    temperatures are at or above the flash point. Toxic gases
    will form upon combustion.
    FIRE FIGHTING INSTRUCTIONS:
    Either allow fire to burn out under controlled conditions
    or extinguish with foam, CO2, or dry chemical. Try to cover
    liquid spills with foam. Shut off fuel to fire if
    possible to do so without hazard.
    FIRE FIGHTING EQUIPMENT:
    NIOSH approved self-contained breathing apparatus and eye
    protection are required for firefighting personnel on all
    indoor fires and any significant outdoor fires.
    HAZARDOUS COMBUSTION PRODUCTS:
    Smoke, fumes, carbon monoxide, carbon dioxide and water.
    NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
    Health-1, Flammability-1, Reactivity-0 (Based on components)
    ----------------------------------------------------------------------
    6. ACCIDENTAL RELEASE MEASURES
    Notify the appropriate authorities immediately. Take all
    actions necessary to prevent adverse effects of the spill.
    Eliminate ignition sources. Shut off leak if safe to do so.
    Dike spilled liquid with sand/earth and dispose of properly.
    DO NOT use sawdust or other combustible materials. Prevent
    product from entering sewers or waterways.
    National Response Center 1-800-424-8802
    John Deere Plus-50 II 0W40
    Page 3 of 5
    ----------------------------------------------------------------------
    7. HANDLING AND STORAGE
    STORAGE TEMPERATURE: Ambient STORAGE PRESSURE: Atmospheric
    GENERAL:
    Keep container closed. Loosen closure cautiously before
    opening. Store in well ventilated area away from incompatible
    materials. (See Section 10) Keep away from heat, sparks and
    flames. Empty container may still retain hazardous properties.
    ----------------------------------------------------------------------
    8. EXPOSURE CONTROLS / PERSONAL PROTECTION
    ENGINEERING CONTROLS:
    Use mechanical ventilation to control vapor concentrations in
    confined spaces. General ventilation should be sufficient for
    most operations.
    PERSONAL PROTECTION:
    Respirator:
    Use a NIOSH approved air supplied respirator when concentrations
    are over the exposure limits.
    Protective Clothing:
    Wear rubber gloves, rubber boots, a chemical worker's suit
    and/or chemical splash goggles as appropriate.
    --------------------------------
    9. PHYSICAL AND CHEMICAL PROPERTIES
    --------------------------------------
    Boiling point : Not Available
    Vapor pressure : Negligible at ambient
    Vapor density : Not determined
    Solubility in water : Negligible
    Specific gravity : 0.85
    pH : Not available
    Odor : Petroleum (Could be masked)
    Appearance : Clear Amber (Could be dyed)
    Physical state : Liquid
    ----------------------------------------------------------------------
    10. STABILITY AND REACTIVITY
    GENERAL:
    This product is stable and will not polymerize.
    INCOMPATIBLE MATERIALS AND CONDITIONS TO AVOID:
    Strong oxidizing agents.
    HAZARDOUS DECOMPOSITION:
    None.
    John Deere Plus-50 II 0W40
    Page 4 of 5
    ----------------------------------------------------------------------
    11. TOXICOLOGICAL INFORMATION
    No component of this product present at levels greater than 0.1% are
    identified as a carcinogen by NTP, IARC or OSHA. This product uses
    synthetic base oil not refined from petroleum base stocks. The
    potential of base oil prepared by this process to cause cancer has
    not been specifically addressed by the OSHA Hazard communication
    Standard (29 CFR 1910.1200), the International Agency for Research
    on Cancer (IARC), nor the National Toxicology Program (NTP) Annual
    Report. However, the process conditions, chemical analysis, and
    the results of mutagenicity tests all support our opinion that
    these oils should not cause skin cancer.
    ----------------------------------------------------------------------
    12. ECOLOGICAL INFORMATION
    This material may be toxic to aquatic animals based on data for
    additive components and is not expected to be readily biodegradable.
    ----------------------------------------------------------------------

  2. #2
    Administrator WOEII's Avatar
    Join Date
    Apr 2010
    Location
    Syr/NY--->Clw/FL
    Posts
    4,766
    Thanks
    36
    Thanked 233 Times in 218 Posts
    13. DISPOSAL CONSIDERATIONS
    Ensure disposal is in compliance with Federal-State-Local laws.
    Do not landfill or dispose of in sink drains or sewers.
    ----------------------------------------------------------------------
    14. TRANSPORTATION INFORMATION
    DOT (Department of Transportation):
    Proper shipping name : Petroleum Lubricating Oil.
    Hazard class : Not regulated
    Identification number : Not regulated
    Labeling : Not regulated
    ----------------------------------------------------------------------
    15. REGULATORY INFORMATION
    CERCLA(Comprehensive Response Compensation, and Liability Act):
    This product is not subject to any special reporting under the
    requirements of CERCLA. We recommend you contact local
    authorities to determine local reporting requirements.
    SARA TITLE III(Superfund Amendments and Reauthorization Act):
    311/312 Hazard Categories:
    This material is not classified as hazardous by OSHA under
    29 CFR part 1910.1200(d).
    313 Reportable Ingredients:
    Contains less than 2 weight percent of Zinc compounds.
    John Deere Plus-50 II 0W40
    Page 5 of 5
    ---------------------------------------
    15. REGULATORY INFORMATION (Continued)
    -------------------------------
    International Inventory Status:
    United States : All components comply with TSCA Inventory
    Canada : All components comply with DSL
    Europe : one or more components listed on ELINCS. All
    other components listed or exempt from EINECS
    (Secondary notification by importer may be required.)
    Japan : All components notified but may not be on ENCS
    (Secondary notification by importer may be required.)
    Australia : All components notified but may not be on NICNAS
    (Secondary notification by importer may be required.)
    Korea : All components comply with KECI
    China : All components notified but may not be on IECSC
    (Secondary notification by importer may be required.)
    Philippines : All components comply with PICCS
    ----------------------------------------------------------------------
    16. OTHER INFORMATION
    THE INFORMATION PRESENTED HEREIN HAS BEEN COMPILED FROM SOURCES
    CONSIDERED TO BE DEPENDABLE AND IS ACCURATE TO THE BEST OF
    NORTHLAND PRODUCTS COMPANY'S KNOWLEDGE; HOWEVER, NORTHLAND
    PRODUCTS COMPANY MAKES NO WARRANTY WHATSOEVER, EXPRESSED OR
    IMPLIED, OF MERCHANTABILITY OR FITNESS FOR THE PARTICULAR
    PURPOSE, REGARDING THE ACCURACY OF SUCH DATA OR THE RESULTS
    TO BE OBTAINED FROM THE USE THEREOF. NORTHLAND PRODUCTS COMPANY AND JOHNDEEREGATORFORUM.COM
    ASSUMES NO RESPONSIBILITY FOR THE INJURY TO THE RECIPIENT OR TO
    THIRD PARTY PERSONS OR FOR ANY DAMAGE TO ANY PROPERTY AND
    RECIPIENT ASSUMES ALL SUCH RISKS.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •